top of page

AFEB Team

Öffentlich·87 Mitglieder
Nolan Martinez
Nolan Martinez

X Unlock Tool 1.0.0 45: A Simple and Fast Way to Unlock Your Sony Ericsson Xperia Phone


you can be very precise in how you turn the tool on. you can specify that the tool should only start when it is at the same temperature (temperature to be set in degrees c) as the tool that is currently selected or hot end in use. you can also specify that it should start at a temperature either higher or lower than the temperature currently selected for the hot end. you can start at whatever temperature you like, but be careful if you leave the tool running for long periods of time because it can be hard to cool down, so it's a good idea to start at a reasonably low temperature.




x unlock tool 1.0.0 45



40 specifies that the temperature is to be set to 40 degrees c. -40 or [40 switches the temperature to 40 degrees c. the same applies to 55 but here the temperature is to be set to 55 degrees c. -55 or [55 specifies the temperature as 55 degrees c. 90 specifies that the temperature is to be set to 90 degrees c. -90 or [90 specifies the temperature as 90 degrees c. note that the temperature is not set in degrees f, it is set in degrees c. for example, if you set the temperature of the nozzle to 90 degrees c and the hot end to 120 degrees c, the temperature at the nozzle will be 10 degrees c higher than the hot end. if the temperature at the nozzle is set to 110 degrees c, it will be 10 degrees c lower than the hot end. so if your hot end were set to 220 degrees c, the nozzle would be set to 210 degrees c.


you can also set the temperature where the nozzle is not coupled to the hot end. this is useful when you need to use a new nozzle, and don't want to wait for the hot end to heat up before changing over.


https://www.upinoxtrades.com/group/upinox-trades-nigeri-group/discussion/1fdf2e77-7553-4e91-8aa3-b3a6a32ab2df

Info

Willkommen in der Gruppe! Hier können Sie sich mit anderen M...

Mitglieder

  • Hobz Mfpkd
    Hobz Mfpkd
  • Reno Smidt
    Reno Smidt
  • Daeron Daeron
    Daeron Daeron
  • Snake Boon
    Snake Boon
bottom of page